úvodní stránka
úvodní stránka
Production program

Shirring Machines

Printing Machines

Moistening and Rewinding Machines

Stránky se upravují. | The pages under construction.

- Shirring Machines - ASM 1U/ECO

Automatic Shirring Machine

ASM 1U/ECO - Shirring Machine

ASM 1U/ECO - Shirring Machine

Description of the machine

The ASM 1U Shirring Machine has been designed for half- automatic or automatic discontinue shirring of the all kinds of artificial sausage casings (plastic, fibrous and collagen) using a two shirring rolls with blades. Can be equipped as well as for netting and clipping of shirred casings into shirred sticks.  The machine can be adapted for processing of casings from diameter 40 up to 90 mm like a standard. Accessory equipment is available for outside moistening and oiling of the casings. Control of the machine operation is limited to replacement of disks with casings and collecting of shirred sticks. The shirring process is powered by a set of electrical and pneumatic elements (SMC).

The disk with casing is fixed on the unwinding part with a detector which stops the machine when the whole length of casing on the disk has been unwind off. The band of the casing is guided through metering rollers into an inlet mandrel where, due to press air, it is inflated and transferred to the shirring rolls. Shirred casing is advanced onto one mandrel where a cutting mechanism cuts it off as soon as the preset length has been reached. After is the casing is relocated to the pressing mechanism, where it is pressed together and then is slid over to the netting and clipping mechanism (if are in equipment) . Finished shirred sticks are collected on a discharge desk.

In case of any failure the machine is automatically stopped and a programmable PLC automatic (LENZE) indicates the faulty element. The machine can be is fully-equipped, with clipping machine and  with netting equipment.

Extra parts (on a request)

  • outside oiling system
  • clipping machine for automatic packing  on the machine


  • The simple operation
  • The netting and clipping device can be in automatic cycle
  • The very low energy consumption
  • The low noise level, The space-sawing design
  • The possibility of special equipment on a request

The producer has all rights reserved to change design of the shirring machines and parts, which has no influence to right function of the machines.
contact | e-mail | home | top
Copyright © 2002-2021 Fin-Form s.r.o. All rights reserved.
Programming & Webhosting by MagicHouse s.r.o.